Trimwork & Cabinetry
...Works for any spring angle and (almost) any size crown.
Fast-setting glue and sacrificial guides keep your workpiece smooth and snipe-free
Spice up plywood cabinets with solid wood inlays. Spice up solid wood inlays with cleanly cur dado slots
Sometimes a blade thickness is waaay more than you need to cut off. If you need to take 1/32 off the end of a board, here's how to do it quickly.
Adjust the boxes to the hardware, and then to each other. Rotating the panel gives a little extra wiggle room
Assembling a big box with a big back that anchors the bed cabinet to the wall
A little extra space helps, and can be tightened with a washer if needed
A strip of hardwood hides the joint and customizes the look
A lot of pocket screws hold the sides and bottom ribs together
Main sections of the process are broken into 3-5 minute videos and nifty tips are broken out into 30-second - 1-minute video clips below.
Four straight 2x6s, a lot of glue, a mortiser, planer, sharp chisels, band saw, forstner bits, a block plane, oscillating spindle sander, and a rubber mallet are all you need
Edgebanding without sanding: call attention to the joint rather than trying to hide it. Because you won't hide it.
An accurate setup made from scraps can help you salvage lumber that is too crooked to frame with but could be great for blocking or furring strips