Belt, suspenders, rainscreen, and redundancy make this wall awesome.
WRB & Flashing
The mission of water is to turn houses to mush. Some drip edge flashings may actually help water accomplish this mission.
Recessed into thick layers of insulation, innie windows are protected from the weather
I get this question all the time: "Stucco all the way down to the roofing: right or wrong?" Answer: WRONG. and here's why...
A thermal break and solid backing puts the window on the outer face of a thick wall. Now, there's room on the inside window sill for cats and bowling trophies
Flash the boot like any other roof penetration, and snap the tube into place—just make sure to align the hole between the ceiling joists...
This critical element is often omitted from window installation
Offset the joints and seal the gaps to keep air leaks out of the thick walls
Holes in walls amount to big walls full of holes unless you seal the hole after you make it
Windows cannot rest on the foam, so they hang from wood bucks
Use expensive stretch tape for the tricky parts and regular non-stretch tape for the rest of the window flashing
Wide tape spans the many layers of a thick wall to make an air tight and water tight seal
A deep energy retrofit in Concord, MA illustrates everything you need to know to bring a house to energy überville
Three videos covering the step by step process for flashing, installing, and airsealing an in-betweenie window in a Passive House Retrofit