Align a Tablesaw Blade to be Parallel to the Fence

A relatively quick and simple method for cleaning up your tablesaw cuts
Dec. 8, 2018
2 min read

A relatively quick and simple method for cleaning up your tablesaw cuts

An out-of-aligned blade can cause sloppy cuts and kickback. But it is a pretty straightforward fix. You do not need special tools to do this, you could do it with a combination square, but why use what you've got when you can buy a specialized tool, right?

Tamar uses an A-Line-It Kit, which is a dial caliper with an arm that rides in the miter slot of the saw.

Step by step to align a tablesaw blade to the fence:

  • Unplug the table saw.
  • Raise the table saw blade all the way and then back it off about 1/16 inch
  • Insert dial caliper in the miter slot and make sure the fit is snug.
  • Index the caliper close to a tooth on the blade (but not on a tooth). Mark this spot with a Sharpie.
  • Rotate the face of the indicator so that the needle is on zero, and lock it down.
  • Rather than sliding the indicator to the other end of the blade, rotate the blade forward and move the indicator forward.
  • Take the reading. Chances are, the needle is not on the zero anymore.
  • On the DeWalt tablesaw that Tamar is using, the blade housing is held in place with two hex bolts. Loosen the hex bolts.
  • Tap the blade housing with a mallet in the direction that the blade needs to move. Tap the housing until the dial indicator is slightly past zero. It will move back slightly when you re-tighten the hex bolts.
  • Rotate the blade back to the first position to verify that it is still at zero.
  • Lock the hex bolts back down, and determine if the blade is zero-ed out at both front and back.
  • Cut wood.

—Tamar Hannah is a woodworker in New Jersey with a YouTube channel, 3x3 Custom with some great videos illustrating great projects.

About the Author

Tamar Hannah

Sign up for ProTradeCraft Newsletters
Get all the latest news and updates.